Jump to content

Open-Source Design page

From seaCell

Revision as of 20:38, 24 March 2026 by Alexis-outside (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

trunkCam is an open-source hardware project. If you would like to make your own, you will need:

the parts from the Bill of Materials
the 3D printed parts listed below

The design files for trunkCam are in Fusion, and are viewable and downloadable at this link

3D printable parts:

Retrieved from "http://wiki.seacell.earth/index.php?title=Open-Source_Design_page&oldid=67"