Open-Source Design page: Difference between revisions
No edit summary |
No edit summary |
||
| Line 17: | Line 17: | ||
*[https://www.dropbox.com/scl/fi/lg43cgystblrcfejwm9hr/Capstan.stl?rlkey=lw0n8m6vclv3rcen0zkv3jznv&dl=0 Capstan] | *[https://www.dropbox.com/scl/fi/lg43cgystblrcfejwm9hr/Capstan.stl?rlkey=lw0n8m6vclv3rcen0zkv3jznv&dl=0 Capstan] | ||
*[https://www.dropbox.com/scl/fi/qmfn8ch0mbx0xh9hj39l3/Handle.stl?rlkey=1f1cnj4letr3njx6c5a2skpzn&dl=0 Handle] | *[https://www.dropbox.com/scl/fi/qmfn8ch0mbx0xh9hj39l3/Handle.stl?rlkey=1f1cnj4letr3njx6c5a2skpzn&dl=0 Handle] | ||
A zip file of all the STLs [https://www.dropbox.com/scl/fi/ | *[https://www.dropbox.com/scl/fi/kb8lcip7b54k6z8actd8j/Key.stl?rlkey=6q665wtswzc2e3ax86mbmbfno&dl=0 Key] | ||
A zip file of all the STLs [https://www.dropbox.com/scl/fi/u478st2k1163ilufqfyta/trunkCam-v1.0.zip?rlkey=q4ysn00zdf6z2ip2sndwk3kcj&dl=0 is available here] | |||
Latest revision as of 23:25, 30 March 2026
trunkCam is an open-source hardware project. If you would like to make your own, you will need:
- the parts from the Bill of Materials
- the 3D printed parts listed below
The design files for trunkCam are in Fusion, and are viewable and downloadable at this link
3D printable parts:
A zip file of all the STLs is available here
If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the Modifications page. We review these regularly and will consider integrating with the main design, with attribution to the creator.
There is also a series of accessories that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs.