Open-Source Design page: Difference between revisions

Revision as of 20:46, 24 March 2026

trunkCam is an open-source hardware project. If you would like to make your own, you will need:

the parts from the Bill of Materials
the 3D printed parts listed below

The design files for trunkCam are in Fusion, and are viewable and downloadable at this link

3D printable parts:

A zip file of all the STLs is available here

If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the Modifications page. We review these regularly and will consider integrating with the main design, with attribution to the creator.

There is also a series of accessories that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs.

@@ Line 3: / Line 3: @@
 * the parts from the [https://docs.google.com/spreadsheets/d/1cBpvzQr5q_kBL8JIbCuVbll7WQdTomYz7Iyf3H-uzQA/edit?usp=sharing Bill of Materials]
 * the 3D printed parts listed below
@@ Line 9: / Line 10: @@
 D printable parts:
-*
+*[https://www.dropbox.com/scl/fi/nhba4fyzemnofcnn25k9v/spine.stl?rlkey=vkjyh6xm5edj83zc38mt15h7f&dl=0 Spine]
+*[https://www.dropbox.com/scl/fo/35qyq8swjdmjm9aexrpgb/AIFEZDlOs5cbNKS9yfUb09g?rlkey=q2xplfyatjtkbfyulckbh5wwp&dl=0 Endcap]
+*[https://www.dropbox.com/scl/fi/fytbg9tymygbl1bh1w3ju/clamping-arm.stl?rlkey=n1sd80l2pjr6ynch9e16l261n&dl=0 Clamping Arm]
+*[https://www.dropbox.com/scl/fi/8ax8vzx473ua6b33oxz8q/Tensioning-Cap.stl?rlkey=l6vl8kjd8qrk2b1bqnt3h8fd1&dl=0 Tensioning Cap]
+*[https://www.dropbox.com/scl/fi/cldlrd4b36p1qducs5qeb/Capstan-Cap.stl?rlkey=siy05is7p7fekk11ys4pz5r3m&dl=0 Capstan Cap]
+*[https://www.dropbox.com/scl/fi/lg43cgystblrcfejwm9hr/Capstan.stl?rlkey=lw0n8m6vclv3rcen0zkv3jznv&dl=0 Capstan]
+*[https://www.dropbox.com/scl/fi/qmfn8ch0mbx0xh9hj39l3/Handle.stl?rlkey=1f1cnj4letr3njx6c5a2skpzn&dl=0 Handle]
+A zip file of all the STLs [https://www.dropbox.com/scl/fi/740uiyas56pjelawxag4q/trunkCam-1.0.zip?rlkey=f30ed6rwqlvloc5ig7b2ae8md&dl=0 is available here]
+If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the [[Modifications]] page.  We review these regularly and will consider integrating with the main design, with attribution to the creator.
+There is also a series of [[accessories]] that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs.