Open-Source Design page: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
trunkCam is an open-source hardware project. If you would like to make your own, you will need: | trunkCam is an open-source hardware project. If you would like to make your own, you will need: | ||
* the parts from the Bill of Materials | * the parts from the [https://docs.google.com/spreadsheets/d/1cBpvzQr5q_kBL8JIbCuVbll7WQdTomYz7Iyf3H-uzQA/edit?usp=sharing Bill of Materials] | ||
* the 3D printed parts listed below | * the 3D printed parts listed below | ||
The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | ||
3D printable parts: | |||
* | |||
Revision as of 20:38, 24 March 2026
trunkCam is an open-source hardware project. If you would like to make your own, you will need:
- the parts from the Bill of Materials
- the 3D printed parts listed below
The design files for trunkCam are in Fusion, and are viewable and downloadable at this link
3D printable parts: