Open-Source Design page: Difference between revisions
Created page with "open-source design" |
No edit summary |
||
| Line 1: | Line 1: | ||
open-source design | trunkCam is an open-source hardware project. If you would like to make your own, you will need: | ||
* the parts from the Bill of Materials | |||
* the 3D printed parts listed below | |||
The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | |||
Revision as of 20:33, 24 March 2026
trunkCam is an open-source hardware project. If you would like to make your own, you will need:
- the parts from the Bill of Materials
- the 3D printed parts listed below
The design files for trunkCam are in Fusion, and are viewable and downloadable at this link