Open-Source Design page: Difference between revisions
Created page with "open-source design" |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
open-source design | trunkCam is an open-source hardware project. If you would like to make your own, you will need: | ||
* the parts from the [https://docs.google.com/spreadsheets/d/1cBpvzQr5q_kBL8JIbCuVbll7WQdTomYz7Iyf3H-uzQA/edit?usp=sharing Bill of Materials] | |||
* the 3D printed parts listed below | |||
The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | |||
3D printable parts: | |||
*[https://www.dropbox.com/scl/fi/nhba4fyzemnofcnn25k9v/spine.stl?rlkey=vkjyh6xm5edj83zc38mt15h7f&dl=0 Spine] | |||
*[https://www.dropbox.com/scl/fo/35qyq8swjdmjm9aexrpgb/AIFEZDlOs5cbNKS9yfUb09g?rlkey=q2xplfyatjtkbfyulckbh5wwp&dl=0 Endcap] | |||
*[https://www.dropbox.com/scl/fi/fytbg9tymygbl1bh1w3ju/clamping-arm.stl?rlkey=n1sd80l2pjr6ynch9e16l261n&dl=0 Clamping Arm] | |||
*[https://www.dropbox.com/scl/fi/8ax8vzx473ua6b33oxz8q/Tensioning-Cap.stl?rlkey=l6vl8kjd8qrk2b1bqnt3h8fd1&dl=0 Tensioning Cap] | |||
*[https://www.dropbox.com/scl/fi/cldlrd4b36p1qducs5qeb/Capstan-Cap.stl?rlkey=siy05is7p7fekk11ys4pz5r3m&dl=0 Capstan Cap] | |||
*[https://www.dropbox.com/scl/fi/lg43cgystblrcfejwm9hr/Capstan.stl?rlkey=lw0n8m6vclv3rcen0zkv3jznv&dl=0 Capstan] | |||
*[https://www.dropbox.com/scl/fi/qmfn8ch0mbx0xh9hj39l3/Handle.stl?rlkey=1f1cnj4letr3njx6c5a2skpzn&dl=0 Handle] | |||
*[https://www.dropbox.com/scl/fi/kb8lcip7b54k6z8actd8j/Key.stl?rlkey=6q665wtswzc2e3ax86mbmbfno&dl=0 Key] | |||
A zip file of all the STLs [https://www.dropbox.com/scl/fi/u478st2k1163ilufqfyta/trunkCam-v1.0.zip?rlkey=q4ysn00zdf6z2ip2sndwk3kcj&dl=0 is available here] | |||
If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the [[Modifications]] page. We review these regularly and will consider integrating with the main design, with attribution to the creator. | |||
There is also a series of [[accessories]] that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs. | |||
Latest revision as of 23:25, 30 March 2026
trunkCam is an open-source hardware project. If you would like to make your own, you will need:
- the parts from the Bill of Materials
- the 3D printed parts listed below
The design files for trunkCam are in Fusion, and are viewable and downloadable at this link
3D printable parts:
A zip file of all the STLs is available here
If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the Modifications page. We review these regularly and will consider integrating with the main design, with attribution to the creator.
There is also a series of accessories that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs.